Kangaroo 924 Enteral Feeding Pump

Features:

• Pre-Set volume and overflow infusion safeguards to ensure the correct and consistent delivery of nutrition
• Kangaroo™ 924 pump is used exclusively with the Kangaroo™ 924 pump sets
• Latex Free
• ABS/PC Plastic fire resistant case material
• Portable operation-built in rechargeable battery
• Wide flow rate range 1-300 ml/hr in 1 ml/hr increments
• Easy-to-use controls make set-up and operation of the unit intuitive
• Language selection (13 languages available)
• Touch panel and knob operation
• Automatic systems check after pump has been turned ON
• Large LED display
• Low occlusion pressure
• Pump will not overcome back pressure greater than approximately 12 psi (82.7 kPa)
• Integral pole clamp
• Use of OPTIX pump sets to prevent free flow from inadvertent misload of pump set onto pump
• Pump running indicator lights
• DC motor with intermittent operation
• Adjustable alarm volume
• Memory of flow rate setting is retained for 16 or 24 hrs. after pump shut off, depending on AC connection status

Operating Range:

• Rate: 1-300 ml/hr in 1 ml/hr increments
• Dose: 1-2000 ml in 1 ml increments
• Volume delivered: 1-9999 ml (rollover is accounted for)

Accuracy:

• 10% or 0.5 mL/hr, whichever is larger, with top of the fluid column at 71.12 cm (28in) ± 0.76 cm (0.3in) above the top of the pump,at a room temperature of 22 °C ± 2 °C (72 °F ± 3 °F), using a new 924 feeding set for no longer than the recommended 24 hours of maximum usage
• Confidence limits for accuracy are based upon those included in the ANSI/AAMI ID26-1992 American National Standard for Infusion Devices
• Reported accuracy is based upon the time-based accuracy calculation in this standard, as applicable for enteral feeding

Alarms:

• Flow Error
• Low Battery
• Hold Error
• Load Set
• System Error
• VTBD Delivered

 Shut off and Activation of Audible and Visible Alarms When:

• Feeding container is empty
• Feeding tube becomes occluded
• Drop sensors are blocked
• Battery low (alarms 15 minutes before pump shut off)
• Unit is left on “HOLD” longer than 5 minutes
• Pump set is improperly loaded
• Self diagnosed problem which requires technical servicing
• Pump motor malfunction
• Ambient light error

Battery:

• Rechargeable NiMH
• Automatically charges when pump is plugged into wall outlet
• Recharge time for fully discharged battery is approximately 12 hours
• A new battery, when fully charged, will operate for approximately 16 hours at 125 milliliters per hour

Transport and Storage:

• Not to exceed 30 days
• 0° to 50°C (32° to 122°F)
• 10-95% RH, non condensing

Specifications:

• Dimensions: 7-1/4in H x 5-1/2in W x 4-1/4in D
• Weight: approximately 3.625 lbs
• Power requirements: 120V~, 60 Hz, 1 Amp
• Ambient operating conditions: 10° to 40°C (50° to 105°F)
• Mode of operation: continuous
• Memory of settings when pump is off: 16 hours for battery, 24 hours for AC
• Occlusion pressure: 12psi (82.7 kPa) nominal

Manufacturer Warranty: 60 days