Ask The Pros:

Question
Hello, I am trying to pick out a wrist splint. I now know what a palmar stay and a dorsal stay is but could you please tell me what spoon stays, steel posterior stays, and medial/lateral stays are? I am looking for the splint that will provide maximum immobilization, something that will keep my wrist joints from moving around as much as possible. The Premier Wrist Splint was recommended for me the last time I wrote asking for help. However, that splint only mentions a palmar stay. I have seen splints that have other stays like the ones I mentioned above and am wondering if a splint with more stays will provide more immobilization. Thank you very much! -Tracy

Answer

The most stays offered in any of the wrist supports/braces we carry are 2, palmar and dorsal.  If you are looking for something with support that great, we may suggest a custom orthotic company as it seems the industry standard offers only palmar or both palmar and dorsal stays.

http://www.hitechathleticbracing.com/products/custom-wrist-braces/

http://www.maximumphysiotherapy.com/Services/Custom-Hand-And-Wrist/a~2469--c~335576/article.html

http://www.cascadeorthotics.com/html/wrist.html

http://orthomerica.com/custom/custom_who.htm

Date Posted:
6/26/2011 7:10:50 AM

Question
Looking for treadmill with 500 pound weight capacity

Answer

Norma Jean,

This treadmill has a 650 lb weight capacity, and may suit your needs. Thank you for your inquiry.

Date Posted:
6/26/2011 4:31:58 AM

Question
Will this fit Econom set w/ophthalmoscopeItem#102-0502GUR?

Answer

Barbara,

No, those specula will not fit. For the otoscope included in item #: 102-0502GUR, you will need the following speculum:

http://www.medical-supplies-equipment-company.com/product/ppf/id/22168/new_prod_full.asp

It is reusable, available from 2mm to 5mm, and sold individually. There are no disposable specula available for this scope. Thank you for your inquiry.

Date Posted:
6/24/2011 6:33:08 PM

Question
Disculpe buen dia queria consultarle sobre el tiempo de entrega ya que estoy ubicado en tegucigalpa, Honduras y estoy leyendo que la tendrian que fabricar no se si me equivoco me gustaria esta informacion. ademas del precio CIF

Answer
Se tarda aproximadamente cuatro semanas para preparar la mesa para su envío. A continuación, se llevará a 2-3 semanas para que el envío llegue a Honduras.

Date Posted:
6/24/2011 4:58:19 PM

Question
Hi...I need only the Reusable Finger Sensor, 3 feet.My address is on the Mexico.I need the price place.

Answer

We have a replacement sensor for this unit available for $175 USD and shipping will be determined.

Date Posted:
6/24/2011 4:50:55 PM

Question
looking for a bidet-type cleansing 'seat' to assist personal care for female Alzheimers patient

Answer

We have a product that would be of use, it is called a Sitz Bath.  You may view the link for this item below:

http://www.medical-supplies-equipment-company.com/product/ppf/id/5222/new_prod_full.asp

Date Posted:
6/24/2011 2:27:16 PM

Question
I just wanted to make sure that these are cloth gowns that can be washed repeatedly.Thanks

Answer
Babette, yes these cloth gowns can be washed. Thank you for your inquiry.

Date Posted:
6/24/2011 10:48:52 AM

Question
i had precision device . i need the strips . if thier any supplier in egypt or middle east , and if i buy it from your site , can u ship it to egypt.

Answer
Thank you for your inquiry. Regrettably, we don't have any other suppliers in egypt or middle east. However, we can ship to egypt. The only approved payment for international orders is wire-transfer.

Date Posted:
6/24/2011 9:49:31 AM

Question
We would like to buy 1000ml Canister. If you please keep me informed about the products qualities and price I would be very grateful.Kind Regards,Secil COBANInternational Relations CoordinatorKONFORT ÖZEL SAÐLIK HÝZMETLERÝ TIBBÝ MALZ. SAN. T

Answer

The canister sizes we carry are 2400cc, 1500cc, 1200cc and 800cc.

http://www.medical-supplies-equipment-company.com/SP/PPF/Param/452512_0_1_0/Products.asp

Date Posted:
6/24/2011 9:31:17 AM

Question
What is the benefit of using this unit

Answer

For people experiencing neck pain, traction of the spine, also known as cervical traction, is a commonly used therapy. However, its benefits for neck pain have not been scientifically proven.

In traction, tension is placed on the head to pull it up and away from the neck, stretching the muscles and ligaments around the vertebrae of the spine and expanding the space between the vertebrae. The goal is to provide the opportunity for muscles to relax and pinched nerves to be released.

Traction: Available Methods
Two types of traction are used to stretch out the cervical spine:

• Manual traction. A physical therapist performs this type of traction. The patient lies down on a table, and the therapist uses his or her hands to pull the head away from the neck. While performing manual traction, the therapist may reposition the head to achieve better results, moving it to the side or turning the head.
• Mechanical traction. This form of traction for the cervical spine involves tension provided by mechanical means. A machine may provide the tension, or it can be a system of weights used with a harness or sling. Straps are placed on the patient's head, and then mechanical pressure is used to pull the head away from the neck and spine.

Traction: What to Expect
The specifics of the traction therapy a person receives depends on the source of pain in their neck and spine. In most cases of mechanical traction, 7 to 10 pounds of weight will be applied for a half-hour, often two or three times daily. Therapists often will use heat or muscle relaxants to make the traction more effective.

During traction, the pull on your spine may be continuous or intermittent, again depending on your condition. Doctors who recommend traction find that gentle pressure applied off and on is often best to help control pain from a fresh injury or irritation. More forceful traction can be used for joints or muscles that refuse to relax or reposition.

Since traction is often used several times a day, some patients sometimes take a mechanical weight-and-pulley traction system home with them to use. A weight and pulley go over a door, and the person wears an attached halter on their head. This system can be used with the patient sitting, leaning back, or lying down.

Date Posted:
6/24/2011 3:08:43 AM

Question
Hello, As I am browsing through the wrist splints, I saw one advertised as without dorsal stays. Can you please tell me what exactly dorsal and palmar stays are? If I am looking for a splint with as much immobilization as possible, do I want one with both dorsal and palmar stays? Thank you, Tracy

Answer
The dorsal stay is a rigid piece of plastic or metal inserted into a pocket on the top of the hand.  The palmar stay is the same thing inserted into the palm side of the brace.  These stays provide additional support to help the hand stay in the position supported by the brace.

Date Posted:
6/23/2011 7:27:11 PM

Question
Hello, I have hypermobile joints which has caused me to sprain my wrist for the second time. I am currently using a wrist splint that I bought from the drugstore but I am looking for something better because my wrist is not getting better. I don't want a splint that is designed to give support while still allowing the wrist to freely move around. I need something that's really going to immobilize my wrist so that the joint doesn't move around at all. That's the only way my wrist is going to get better. Can you recommend a product for me? Thanks! -Tracy

Answer

One of the following items (depending on which wrist is affected):

http://www.medical-supplies-equipment-company.com/product/ppf/id/25788/new_prod_full.asp

http://www.medical-supplies-equipment-company.com/product/ppf/id/25789/new_prod_full.asp

Date Posted:
6/23/2011 6:15:41 PM

Question
need oversided cuff for Omron Hem 712C

Answer
Lee, if you could email me back with what year your model is from, I could find the right oversized cuff for you. This is because newer cuffs are not compatible with older versions of the Hem 712C. Thank you for your inquiry. 

Date Posted:
6/23/2011 12:59:14 PM

Question
Iam searching for handheld digital ventilometer.Can this device be used as such to measure RSBI

Answer
After researching this data, we have been unable to confirm that any of the spirometers we offer feature this function.  We might suggest you contacting Vitalograph, the manufacturer, directly and asking any technical questions they may be able to more easily identify: http://www.vitalograph.com/

Date Posted:
6/23/2011 12:48:37 AM

Question
Would like a price on the 260 gal immersion tub with a mix valve and hand sprayer. Item - S062FWHM

Answer
We will provide pricing for this to you shortly.

Date Posted:
6/22/2011 6:50:25 PM

Question
Can you please mail me a paper catalog? Address: 44160 Scholar Plaza Suite 370 Leesburg, VA 20176

Answer

Dear Mr. Tully:

Thank you for your inquiry.  Our web site is our catalogue. We carry products from numerous manufactures and suppliers. We add dozens of products to the web site on daily basis. However, if you are looking for something in particular, we'll be happy to assist you with your search. Please call us toll free at 1-877-706-4480 and a customer service representative will be happy to assist you.

Date Posted:
6/22/2011 4:58:19 PM

Question
Is this the proteam version by Hausmann

Answer
Dear Mat, this table is manufactured by Clinton. 

Date Posted:
6/22/2011 4:44:07 PM

Question
I have cervical DDD and spurring at C4 through C6. e. I have been sleeping on a TempurPedic neck pillow similar to this Core pillow for some years but neck pain continues to get worse. I am a back and side sleeper. Is there another type of pillow you would recommend

Answer

An alternative suggestion which we have had many pleased customers, although not knowing their conditions, with our Therapeutica Pillow.  I have attached a link to the product on our website below as well as a link to the manufacturer.  If you are concerned that it may not be the right fit for you, please feel free to contact the manufacturer with any questions you may have and they'll be able to advise if this is your best option.

http://www.medical-supplies-equipment-company.com/product/ppf/id/10504/new_prod_full.asp

www.therapeuticainc.com

Date Posted:
6/22/2011 2:46:41 PM

Question
Does this exam table come with the option of adding locking casters or wheelsThank you.

Answer
Thank you for your inquiry. Regrettably, this treatment table can not support casters. We apologize for the inconvenience.

Date Posted:
6/22/2011 2:29:56 PM

Question
after I orferwhen do u ship , how long does it take to get to my addrerss in Brewster washington I need this matress now

Answer

Dear Bobbie:

Typical delivery time on in-stock items is 3-5 business days.   Second day air is also available.  Please contact our office for additional information. 

Date Posted:
6/22/2011 12:58:23 PM